Shu's weekly group discussion
→
Asia/Shanghai
Tsung-Dao Lee Institute/N6F-N630 - Smart Classroom (Tsung-Dao Lee Institute)
Tsung-Dao Lee Institute/N6F-N630 - Smart Classroom
Tsung-Dao Lee Institute
Also at Room 603, New Science Building #5, Minhang Campus
15
Description
点击链接入会，或添加至会议列表：
https://cern.zoom.us/j/4042031778
-
-
Speaker: Bai-Hong Zhou (TDLI, SJTU)
Today's focus:
[ssWW]:- Added WZCR to TRExFitter config;
- Current significance results (Run2 only) are:
- Still a bit larger, but much closer to previous asimov-1 results;
Run2 INT
Pre. Results
WZCR (μ)
0.74±0.08
0.86±0.05
LL-WW (Sig.)
1.5
1.6
LX-WW (Sig.)
4.5
5.1
[Hyy*]:
- Updated the lumi in Run 3 workspace;
- Derive the delta mu results for each systenatics:
[DarkSHINE FastSimu]:
- Adapted the Calo-VQ geometry to the DarkSHINE ECAL design;
Plans:
[ssWW]:
- Check the systematics impact for ParT;
- Check the Run3 significance results;
[Hyy*]:
- Wait for the unblinded workspace;
- Derive the combination results with the unblinded workspace;
[DarkSHINE FastSimu]:
- Prepare the short presentation for the introduction of Calo-VQ and the migration work;
- Conduct an initial hyperparameter scan;
-
Speaker: Zhiyu Zhao (TDLI, SJTU)
Today's focus:
[STCF EMC]:- The crystal optical simulation was updated by moving the particle source to 1 m away from the crystal detector, making it more consistent with the actual collider environment. Under this setup, the time distributions of different particle types are more clearly distinguishable. The reason is that particles with different masses have different flight velocities, which means particle identification via timing information is more promising.
- From left to right: 1GeV - 100MeV - 10MeV
- Collect some cosmic-ray events that incident along the crystal’s length direction. The timing resolution is about 0.46 ns, and after removing the contribution from the trigger detector, it is about 0.32 ns.
[DarkSHINE ECAL Prototype]:
- I studied the flex cable design used in the CMS MTD BTL detector and am currently making a PCB prototype to verify the feasibility of applying a flex cable connection in the DarkSHINE ECAL prototype. The plan is to submit it to the factory for production before the festival.
Plans:
- [STCF EMC] : Plan to explore series/parallel readout schemes for multiple SiPMs to improve timing resolution while also preserving energy-signal measurement performance. This will also require designing dedicated readout electroncis.
- [DarkSHINE ECAL prototype] : Completed the flex cable design and tested the signal-quality difference compared with a standard coaxial cable connection.
- The crystal optical simulation was updated by moving the particle source to 1 m away from the crystal detector, making it more consistent with the actual collider environment. Under this setup, the time distributions of different particle types are more clearly distinguishable. The reason is that particles with different masses have different flight velocities, which means particle identification via timing information is more promising.
-
